What to check if an SA-2000 series ESA does not read leakage curent?
Check the fuse. This is an indication of a Open/Blown 250mA/250V fuse, (P/N UF-0250-01) on the front panel.
What causes the test receptacle on an SA-2000 series ESA to read approximately 77 Vac from Hot to Ground instead of the normal 115Vac?
Check the fuse. This is an indication of a blown 250mA/250V fuse, (P/N UF-0250-01) located on the front panel.
What could cause a SA-2000 series ESA to indicate inaccurate ground wire resistance?
Check the fuse. If the fuse on the front of the Safety Analyzer is blown these symptoms can be present. Check for a blown or improper fuse before sending the equipment in for repair.
- 1
- 2